Insert a SIM card and battery
Learn how to insert a SIM card and the battery.
The SIM1 holder can be used for both 3G and 2G SIMs.
1. Push the tool into the hole until the cover is released. Remove the back cover.
2
2
© 2014 Microsoft Mobile. All rights reserved.
5
2. If the battery is in the phone, lift it out.
3. Push the SIM in with the contact area face down.
4. Line up the battery contacts, and put the battery in.
5. Press the back cover down until it locks into place. To switch the phone on, press and hold the
power key
until the phone vibrates.
Note: Switch the device off and disconnect the charger and any other device before removing
any covers. Avoid touching electronic components while changing any covers. Always store and
use the device with any covers attached.
Important: To prevent damage to the SIM card, always remove the battery before you insert or
remove the card.
© 2014 Microsoft Mobile. All rights reserved.
6
Important: Your device uses a micro-SIM card, also known as a mini-UICC SIM card. Use of
incompatible SIM cards, or use of SIM card adapters, may damage the card or the device, and
may corrupt data stored on the card.